ELEGOO Rapid PETG Filament (White)

ELEGOO Rapid PETG Filament (White)

ELEGOO
0,00 € Su mokesčiais
Pristatymas per 7-14 dienas
Nuoroda
6976021769735
Galima (60 Prekės)

ELEGOO Rapid PETG Filament (white)

ELEGOO Rapid PETG (polyethylene terephthalate - a long-lasting plastic modified for high-speed printing) filament in white is designed to print at speeds of up to 600 mm/s - without compromising quality. Thanks to its good fluidity and low susceptibility to shrinkage, the material produces aesthetically pleasing models without warping even on demanding projects.

Drukarka 3D z czerwonym domkiem dla lalek na platformie obok stosu kolorowych szpul filamentu

Durability for everyday use

Rapid PETG combines the ease of printing known from PLA (polylactide - a biodegradable plastic based on plant starch) with durability similar to ABS (acrylonitrile-butadiene-styrene - an impact-resistant plastic commonly used in electronics and household appliances). The filament works well in utility projects that need to withstand pressure, shock or heavy use.

Lampa stołowa w kształcie diamentu świecąca ciepłym światłem obok książek na nocnym stoliku, konewka z uchwytem polewająca rośliny w ogrodzie, kubek na kawę z uchwytem

Hassle-free handling

The material is wound evenly and carefully checked, reducing the risk of tangling. The spool, made from recycled materials, has been vacuum-packed with a moisture absorber to protect it from dust and water. Rapid PETG fits most FDM 3D printers (Fused Deposition Modeling - a technology in which plastic is melted and applied in layers).

Kolorowe wazony z falistą powierzchnią wydrukowane w 3D na drewnianej półce obok stosu szpul filamentu

 

General

ManufacturerELEGOO
Model50.203.0217
ColorWhite
Weight1 kg

 

Recommended print settings

Drying settings before printing70 ± 5 °C
Ambient temperature and humidity≤ 70°C, ≤ 20% relative humidity (store with moisture absorber)
Nozzle temperature240-270 °C
Table temperature (depending on printer and surface)65-75 °C
Type of working surfaceTextured PEI (polyetherimide - a durable, adherent material used as a base for 3D printing) or other compatible surface
Printing speedLess than 600 mm/s

 

Physical properties

Density1.29 g/cm³
Melting point216 °C
Deflection temperature under load72 °C
Softening temperature (Vicat test)70 °C

 

Mechanical properties

Tensile strength (XY - measurement in the horizontal plane of the print, where the material is strongest)42 ± 2 MPa
Elongation at break (XY)8,9% ± 1,5%
Bending strength (XY)68 ± 2 MPa
Bending modulus (XY)2097 ± 173 MPa
Impact strength (XY)87.6 ± 4.2 kJ/m²

Duomenų lapas

Brand
ELEGOO
Category
Creative Technologies
Category
3D Printing
Category
Filaments